Amazing Boreal cardigans

One of the most rewarding aspects of this very rewarding job is seeing folk happily wearing the stuff that you’ve designed. I particularly enjoy seeing knitters’ inventive modifications of my work, and recently came across three versions of my Boreal sweater that are so wonderful that I just had to show you.

Here are friends Shannon, Maggy, and Carol looking completely amazing in their Boreal cardigans. Each size of the Boreal design is totally symmetrical down a central axis . . .

. . . this symmetry makes it really easy to convert into a cardigan. You just add a few stitches to the centre of the body charts, work them in a striped or checkerboard steek sequence, cut the front up the middle when you’re done, and then add button band edgings. Shannon, Carol and Maggy also modified the design by knitting it in the opposite direction to the way it is written — top down.

Again, this is much easier to do than one might think: its simply a matter of turning the charts upside down (each size has its own separate set of charts), and working in the opposite direction, reversing the shaping instructions. I really like the neat side pockets that Carol and Maggy have added to their cardigans.

But what I love most of all about Shannon, Maggy and Carol’s modified Boreals is that they are theirs. Each seems to have selected a palette that perfectly suits their colouring; each cardigan looks totally different, but each completely suits its respective wearer. To see knitters happy in beautiful sweaters makes me happy — particularly when they have been produced and modified from my design.

Shannon, Carol, and Maggy kept careful notes about the modifications they made, which you can see on ravelry (follow the links to see their individual project pages).

Thanks so much, Shannon, Carol and Maggy for allowing me to share these photos!

wrong side

Quite a few of you have been asking to see close-ups of the Boreal colourwork from the wrong side, so here we are:

While the front of the sweater does not really give an indication of the effect of the colourwork on the thickness of the fabric, I think you can really get a sense of this just from looking at the transition between the plain stockinette and stranded sections from the wrong side. You can also see that I have carried my floats over relatively long distances (trusting from previous experience that they will even up and felt together later) but that there are also a few places where I’ve woven them in. As I said in the previous post, I am generally a fearless float carrier, but there are a few rows on the Boreal chart – particularly after one snowflake ends and before another begins – where carrying the float is unfeasible. You can see the dark weaves breaking up the continuity of the pale floats here in the rows above the snowflake.

Here is the same bit of the sweater from the right side. Though you can see a few dog hairs (the inevitable perils of living with a dark, hairy, boisterous animal) you can’t see the floats.

Hope this satisfies your curiosity!

boreal tropical

boreal tropical

Here, as promised, is Mel’s Boreal - which we photographed in the palm houses at the Botanical Gardens.

Mel used two shades of teal for her sweater (Artesano aran shades c740, and 8316) , and reversed the light-on-dark, dark-on-light order of the colourwork. The effect is more subtle than the high-contrast, highly-festive look I’m sporting in my sample.

Mel is wearing exactly the same sweater size as I am, but with slightly less ease. We are similarly petite, but have very different body shapes: while I am narrow of shoulder and meagre of chest, Mel is not. On her sample, the shaping of the sweater is shown to advantage, but there is less room for layers underneath. Mel is also quite proportionately long-waisted, and added a little length (the pattern gives instructions for where and how to do this). If, like her, you intend to lengthen your sweater, you should factor in yardage additional to the quantities specified in the pattern. (She used an additional 14 yards of the paler teal).

I’ve been receiving a lot of queries from knitters who describe themselves as colourwork novices, who are wondering how ‘easy’ they would find this sweater. I would say that, because of the nature of the colourwork, which involves long floats in aran-weight yarn, it is best to feel fairly confident with your preferred colourwork technique before you embark on this project — it is probably not a beginner’s sweater. If you are uncertain, to help you along, here are my top tips to achieve the best look on the colourwork of this sweater:

1) Swatching really is essential to achieve the best fit. I would be inclined to take the time to check your tension on both a decent-sized blocked swatch of plain stockinette and a representative blocked sample of the colourwork pattern. If the fabric is drawing in at all during the colourwork, you may wish to go up a needle size when working these sections of the sweater. Because it involves two layers of aran-weight yarn (cosy!), over the colourwork sections the fabric is quite dense, and the sweater’s inside-capacity is reduced. Be sure to follow the instructions about sizing in the pattern, and consult the schematic carefully for detailed measurements.

2) I generally don’t weave my floats at all – but this sweater is the exception to the rule. Because the pattern involves long stretches of a single colour, I would suggest that it is absolutely necessary to weave your floats. Do this every 6 stitches in a different place on each round to avoid the weaves stacking up and showing to the front of the work.

3) When you are carrying a long float, fan the stitches out a little on the right hand needle before working the next stitch in the contrasting colour. This slows down the pace and flow of the knitting, but is particularly useful if your tension tends to be tight.

4) Always work the ‘trees’ and ‘snowflakes’ as the foreground, or dominant colour (if you are working two-handed, the dominant yarn will usually be in your left hand, or if one handed, will come from underneath). This means that you will need to switch your yarns around at the charts’ mid-way point.

5) If your tension is a bit lumpy and uneven, try turning your work inside out — the knit side will still be facing you (allowing you to work as usual from the right side), but the floats will be stretched around the work, allowing the tension to ease up. This is a particularly useful technique for small- diameter knitting (like sleeves).

6) Block like crazy. In the pattern, I suggest steam-blocking, a technique which the Artesano Aran seems to particularly like (both Mel and I found that, during the blocking process, our stitches seemed to naturally soften and fill-out their allotted space in a very pleasing way).

7) happy knitting!

PS I’m really enjoying reading about your Wintery favourite things.

Boreal giveaway!

Would you like to win a kit to knit up your own Boreal sweater over the holidays? Well, my nice friends at Artesano are providing the yarn for you to do just that! One lucky winner will be able to select their own colourway from Artesano’s great range of aran shades, and I’ll send you the pattern. All you have to do is leave a comment on this post telling me your favourite thing about Winter. We’ll announce the winner on the 20th December. Good luck, everyone!

COMMENTS ARE NOW CLOSED! JENNIFER HAS WON!

Follow

Get every new post delivered to your Inbox.

Join 6,068 other followers